CABLE INFILL - SWAGING REQUIRED

1×19 4mm Cable – 328′ spool

 1×19 4mm Cable – 328′ spool AX00.040.215.B.M supplied in 328 ft. ( 100 meters ) spools 316 Stainless Steel 1×19 – 4mm rope cable only sold by the spool For Wood Square Newels, use...

Left Handed Cable Terminal Stud ( SX )

Left Handed Cable Terminal Stud ( SX ) AX00.050.221SX.B.SP Left handed thread cable terminal stud SX = Left Hand Cable will go inside of the terminal and be crimped. This goes through the post and then secured with the Threaded Nut Cap...

Middle-Tensioning Body

Middle-Tensioning Body AX00.050.235.B.SP Inline Tensioning Body Used for section of cable over 20 feet in length where tension is required to prevent sagging of cable. This includes 4 mm allen wrench to tighten Requires Right Hand and Left Hand...

Right Handed Cable Terminal Stud ( DX )

Right Handed Cable Terminal Stud ( DX ) AX00.050.220DX.B.SP Right handed thread cable terminal stud DX = Right Hand Cable will go inside of the terminal and be crimped. This goes through the post and then secured with the Threaded Nut Cap...

Sloping Washer for Flat Posts

Sloping Washer for Flat Posts AX20.060.245.B.SP This is a sloping washer for rake cable installation. Fits 30 to 40 degree applications 316 stainless steel – 240 grain satin polish For Wood Square Newels, use the ForestKraft link...

Sloping Washer for Round Posts

Sloping Washer for Round Post AX10.060.240.B.SP Sloping washer for angled posts. Sits on a 38 degree angle. Will work on a 30 to 40 degree rake / angle. Fits 42.4 mm (1-2/3 in) round posts. 316 Stainless Steel For Wood Square Newels, use...

Threaded Allen Head Cap Tensioners

Threaded Head Tensioners AX00.050.233SX.B.SP – Left Hand AX00.050.232DX.B.SP – Right Hand For use with 4mm cable 316 Stainless Steel   See our Installation Guides for help on installing the stainless steel system parts...