9141 or 9146 Small Turnout

9141 Left Hand or 9146 Right Hand Small Turnouts for the 9100 Handrail with a 2-5/8" offset.  Shipped one to a box. 3001 Rail Bolt kit and flush plugs included for handrail joinery. Please...

8090-5 5-1/2 Inch Landing Tread Cap

8080-5 5-1/2" Landing Tread Cap.  Can be used to trim balcony runs, the last riser run to a landing or second floor landing, or diver runs.  Trim with 8095 3/4" cove mold to match a solid...

7931 or 7936 Curved-Arm Volutes

7931 Left Hand and 7935 Right Hand curved arm volutes.  Also know as ascending volutes.  For the 6910 Handrail. Volutes are shipped with the rail bolt kits and flush plugs for handrail...

7231 or 7236 Curved-Arm Volutes

7231 Left Hand and 7235 Right Hand curved arm volutes.  Also know as ascending volutes.  For the 6210 Handrail. Volutes are shipped with the rail bolt kits and flush plugs for handrail...

4042B Colonial Starting Newel Post

4042B 3 inch X 54 inch Colonial starting newel post with 5 inch face. Shipped One to a Box. Recommended balusters: 5015, 5141, 4025, 5040, 5067, 5241, 5315. Works well with any handrail...

9100B Soft Maple or Ash Bending Handrail

9100B 2-1/4" Wide X 2-3/8" High, SOFT MAPLE or Ash Bending handrail. 7 piece bending handrail and includes bending mold.   Westfire recommends bending handrail with Dapp's "Plastic Resins...

7041 or 7046 Small Turnout

7041 Left Hand or 7046 Right Hand Small Turnouts for the 6010 Handrail with a 2-5/8" offset.  Shipped one to a box. 3001 Rail Bolt kit and flush plugs included for handrail joinery. Please...

HF-7499-2 2 Rise Gooseneck, No Cap

HF-7499 Gooseneck is a 2-Riser Straight Gooseneck for a rake to straight landing transition (no cap). For HF-6400 Handrail by House of Forgings. Includes up easing (unattached) and rail bolt kits...

6084 Birch Handrail

2-5/8" Wide X 1-3/4" High, BIRCH Contemporary handrail. SOLID 2 layer, no finger joints.  This is a non-stocked item and made to order.  Please allow 2 to 3 weeks to make and ship, FOB Ohio...

2850 1.25" x 1.25" Corner Molding

2850 Hardwood Corner Molding, 1-1/4" x 1-1/4".  Corner Moldings are available in Red Oak, Poplar, Knotty Alder, Pine, Hickory, Birch, Maple, Cherry and Walnut. Enter total lineal footage needed...

8549 Panel Mold

8549 Panel Molding, 3/4" x 2".  Panel Moldings are available in Red Oak, Poplar, Knotty Alder, Pine, Hickory, Birch, Maple, Cherry and Walnut. Enter total lineal footage needed (cut sheet) in...

1018 2-1/2" Casing

1011 Casing, 0.75" X 2.50".  Casing is available in Red Oak, Poplar, Knotty Alder, Pine, Hickory, Birch, Maple, Cherry and Walnut. Enter total lineal footage needed (cut sheet) in the first box...